It is important to ensure that when you are furnishing all the other home facilities in Singapore, you do not forget your kitchen. Your kitchen is a very important facility that plays important roles including preparing your meals and in the modern times, kitchens are also used as a resting place. One of the best ways to ensure that your kitchen looks great is by installing kitchen cabinets. With the right kitchen cabinets in Singapore, your kitchen will not only look elegant, but add its value too. Installing kitchen cabinets in the proper manner is a technique that requires you to have the right skills and knowledge. To help you during the process here are some steps you need to follow as you install Kitchen cabinet in Singapore.
Remove all the old cabinets
If you have old cabinets in your kitchen, you will need to first of all remove them, so that you can have the space you need to install the new ones. Your kitchen will not look great if you combine both the old and the new Kitchen cabinet in Singapore. As you remove the old cabinets, make sure that you do not take the wall with them. There are a few screws that hold the kitchen cabinets in Singapore to your wall. You need to take your time to find where the screws are located. Use screw driver to remove them well so that your wall still remain intact. Make use of a utility knife to take off any cault from the edges.
If you are doing the installation of the kitchen cabinets in Singapore for the first time, it is advisable that you go in order. You need to begin with the wall cabinets and then move down towards the base. Beginning from the top will ensure that there is nothing that will get in the way. It is also ideal to begin from a corner, so that you can reduce frustration and save time in the process.
Remove drawers and doors
It is important that you strip the kitchen cabinets in Singapore before you can put them up. In most cases you will get the kitchen cabinets in Singapore already installed with the drawers and the doors attached. You might find as if it is counterproductive to take them off, but this will make them lighter, easier to handle and make them more available to do the screwing together. All you need to do so to make sure that you mark every drawer and door to ensure they match the original cabinet that it was attached to before.
Provide support for the weight of the kitchen cabinet
To give the right support, you can use a cleat and save your back from suffering problems. It is worth to note that installing kitchen cabinet is not a one person’s job. However, if you are alone, you can use a piece of wood to give support to the weight of the cabinets. This helps in pushing the cabinet back. Despite that it can fall forward, it is not sliding and slipping over your wall.
Make use of a small finished nail
Ensure that you find the studs before you begin the installation of your kitchen cabinets in Singapore. The easiest way you can do this is using a nail especially if it is behind the cabinets. Make a small hole in the wall behind the kitchen cabinets in Singapore for the small nail being used in the process.
Kitchen cabinet plan
You need to have a good plan for the cabinets in your kitchen. Before you can make the order of the new cabinets, you need to make identification of the already existing appliances. You need to understand where the sink, stove, gas, plumbing, refrigerator, electrical outlets and microwaves fit in. All these things are very vital before you can do the installation of your new kitchen cabinets in Singapore.
The microwave outlet
Now it is time to do the microwave installation. You need to put the receptacle in a kitchen cabinet above the microwave. This ensures that when you are fitting the microwave, you do not try to plug it in. It is advisable that you hire a contractor in Singapore to do the installation of an outlet in the cabinet above the microwave.
You need to begin high and stay level. You need to begin leveling from the top most level point in the floor and make use of a benchmark. A benchmark is usually a horizontal line that moves around the perimeter of your kitchen. It might be at a certain height, but basically it is usually a level line that can be measured from the wall cabinets and base.
If you want your kitchen cabinets in Singapore to be at level, you need to have shims. You need to buy them before you start the installation work. They are required to keep the kitchen cabinets in a straight line. This is more important in case there is a bow in your wall. They are found in different thickness, so you need to look for the ones with the right thickness that you require.
A kitchen cabinet filler piece
All kitchen cabinets have a filler piece or scribe, where they meet the wall. Most of the walls are usually not straight and this makes it possible to have a great finish where any contours in your wall are taken up. A piece of scribe keeps the doors and the drawers a bit far from your wall. This ensures that all the moving parts in the kitchen do not touch the wall.
To ensure that you get the best results while installing kitchen cabinet in Singapore, make sure that all the knobs, hinges and drawer slides are of high quality. You need to get durable hardware because the moving parts tend to wear down quickly with time. Better quality parts guarantees you longer life and you also get value of the money that you spend. You can also hire an expert to do the installation for you to ensure satisfactory results.